Heavy duty gratings are used when large loads are required for example as floor coverings for vehicle traffic.
| Heavy duty gratings are used when large loads are required for example as floor coverings for vehicle traffic. GI-RO meets the demands of the Standard regarding heavy duty gratings (DIN 1055-/A1 and 172) by using gratings with a bearing bar thickness of 4-5 mm and a height of 30 mm to 120 mm. The bearing bar dimension (T) should not exceed 2000 mm and the cross bar dimension (QS) should not exceed 1500 mm. A single grating should not be bigger than 1,6 sqm. |
For outside lying pressure locked gratings GI-RO Technik produces extreme firm heavy duty gratings starting with a height of 40 mm and with a special gear tooth system of bearing and cross bars.
| Heavy duty – Heights of bearing bars and banding
T- Banding - heights of bearing bars of 30 mm to 60 mm
Bearing bar | Cross bar | 30/4 mm | 12/3 | 40/4 mm | 12/3 | 30/5 mm | 12/3 | 40/5 mm | 12/3 | 45/5 mm | 12/3 | 50/4 mm | 12/3 | 50/5 mm | 12/3 | 60/5 mm | 12/3 |
|
| 5 mm flat steel banding – heights of bearing bars of 70 mm to 120 mm
Bearing bar | Cross bar | 70/5 mm | 25/3 | 80/5 mm | 25/3 | 90/5 mm | 25/3 | 100/5 mm | 25/3 | 110/5mm | 25/3 | 120/5 mm | 25/3 |
|
